P295GH 1.0481 - EN 10222-2-2017

Grade	P295GH
European Standard Steel Grade	1.0481
Corresponding Standard	EN 10222-2-2017 Steel Forgings for Pressure Purposes. Part 2:Ferritic and Martensitic Steels with Specified Elevated Temperature Properties
Classification	Carbon Steel

P295GH Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	Ti	V	Nb	More
Minimum Value	0.08	-	0.9	-	-	-	-	-	-	-	-	-	Cr+Cu+Mo+Ni≤0.70
Maximum Value	0.2	0.4	1.5	0.03	0.025	0.3	0.3	0.3	0.08	0.03	0.02	0.01	Cr+Cu+Mo+Ni≤0.70

P295GH Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤60	Austenitizing or Solution Annealing, 890~950℃, Air Cooling	460~580	≥285	I：≥24，tr/t：≥22	I：≥40，tr/t：≥27
60＜t≤100	Austenitizing or Solution Annealing, 890~950℃, Air Cooling	460~580	≥260	I：≥23，tr/t：≥21	I：≥40，tr/t：≥27

1 Approximate Comparison Table Pressure-Bearing Flat Steel

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
P295GH	P295GH	1.0481

2 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
JIS	ASTM	ISO	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
SG365 SPV315 SPV32	A516Gr.65 X46	P11	1.0436	A48AP A48CP A48FP	P295GH	1.0481	14G2 18K	2102 2103	224-460B 224Gr.460 224Gr.490 430LT

P295GH Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!