Grade CuNi18Zn20
European Standard Steel Grade CW409J
Corresponding Standard EN 12166-2016
Copper and copper alloys - Wire for general purposes
Classification Copper and Copper Alloys
Density 8.7 g/cm3
CuNi18Zn20 Chemical Element Composition Content (%)
Component Fe Mn Ni Cu Pb Sn Other Total More
Minimum Value - - 17 60 - - - Zn:余量
Maximum Value 0.3 0.5 19 63 0.03 0.03 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuNi18Zn20 Mechanical Properties
diameter*
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
1.5<d≤20 CuNi18Zn20-H105 H105 HV
105~145
1.5<d≤12 CuNi18Zn20-H145 H145 145~185
1.5<d≤10 CuNi18Zn20-H180 H180 180~220
1.5<d≤4 CuNi18Zn20-H210 H210 ≥210
d≤1.5 CuNi18Zn20-H230 H230 ≥230
1.5<d≤20 CuNi18Zn20-R400 R400 ≥400 ≤290 ≥25(A100),
≥30(A11.3),
≥35(A)
0.1<d≤12 CuNi18Zn20-R480 R480 ≥480 ≥250 ≥7(A100),
≥9(A11.3),
≥11(A)
0.1<d≤10 CuNi18Zn20-R580 R580 ≥580 ≥400 ≥2(A100),
≥3(A11.3),
≥5(A)
0.1<d≤4 CuNi18Zn20-R660 R660 ≥660 ≥550
0.1<d≤1.5 CuNi18Zn20-R800 R800 ≥800 ≥750
All specifications CuNi12Zn24-M M No specification No specification No specification No specification
Approximate Comparison Table Cupper and cupper alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuNi18Zn20 2.0740 CuNi18Zn20 CW409J

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!