中文版
Home Material EN 12166-2016
简体 | 繁體
Grade CuSn8
European Standard Steel Grade CW453K
Corresponding Standard EN 12166-2016
Copper and copper alloys - Wire for general purposes
Classification Copper and Copper Alloys
Density 8.8 g/cm3
CuSn8 Chemical Element Composition Content (%)
Component Fe P Ni Pb Zn Sn Other Total More
Minimum Value - 0.01 - - - 7.5 - Cu:余量
Maximum Value 0.1 0.4 0.2 0.02 0.2 8.5 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuSn8 Mechanical Properties
diameter*
d
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
1.5<d≤12 CuSn8-H090 H090 HV
90~130
1.5<d≤12 CuSn8-H140 H140 140~170
1.5<d≤12 CuSn8-H170 H170 170~200
1.5<d≤8 CuSn8-H185 H185 ≥185
1.5<d≤4 CuSn8-H220 H220 ≥220
d≤1.5 CuSn8-H265 H265 ≥265
0.1<d≤12 CuSn8-R390 R390 ≤280 ≥35(A100)，
≥40(A11.3)，
≥45(A)
0.1<d≤12 CuSn8-R450 R450 ≥450 ≥280 ≥18(A100)，
≥22(A11.3)，
≥26(A)
0.1<d≤12 CuSn8-R550 R550 ≥550 ≥400 ≥10(A100)，
≥12(A11.3)，
≥15(A)
0.1<d≤8 CuSn8-R620 R620 ≥620 ≥500 ≥4(A100)，
≥6(A11.3)
0.1<d≤4 CuSn8-R750 R750 ≥750 ≥680
0.1<d≤1.5 CuSn8-R920 R920 ≥920 ≥800
All specifications CuSn8-M M No specification No specification No specification No specification
1 Approximate Comparison Table bronze
China United States International Organization for Standardization Germany European Standard Russia
GB ISC ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
QSn8-0.3 C52100 92Cu-8Sn-.2P C52100 CuSn8 C52100 CuSn8 2.1030
C52100 		CuSn8P CW459K БрОФ8-0.3
2 Approximate Comparison Table Cupper and cupper alloy
United States International Organization for Standardization Germany France European Standard Sweden United Kingdom
UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade SS BS EN/BS
C90700 CuSn10 G-CuSn10 2.1050.01 CuSn8 CuSn10-C CC480K CuSn10 CT1
3 Approximate Comparison Table Cupper and cupper alloy
Japan United States International Organization for Standardization Germany France European Standard Russia United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST BS EN/BS
C5212 C52100 CuSn8 CuSn8 2.1030 CuSn9P CuSn8 CW453K BrOF7-0.2 PB104
CuSn8 Corresponding Standards(Same grade name, different standards)
1 EN 12163-1998
CuSn8 CW453K
2 EN 12166-1998
CuSn8 CW453K
3 EN 1654-1998
CuSn8 CW453K
4 EN 12166-2016
CuSn8 CW453K
5 DIN 17672-1-1983
CuSn8 2.1030
6 DIN EN 12163-1998
CuSn8 CW453K
7 DIN EN 12163-2016
CuSn8 CW453K
8 DIN 17671-1-1983
CuSn8 2.1030
9 DIN EN 12166-2016
CuSn8 CW453K
10 DIN EN 12166-1998
CuSn8 CW453K
11 ISO 427-1983
CuSn8
12 EN 12163-2016
CuSn8 CW453K
13 DIN 2076-1984
CuSn8
14 EN 12167-2024
CuSn8 CW453K
15 DIN EN 12449-2019
CuSn8 CW453K
16 EN 12449-2023
CuSn8 CW453K

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!