Grade CuZn10
European Standard Steel Grade CW501L
Corresponding Standard EN 12166-2016
Copper and copper alloys - Wire for general purposes
Classification Copper and Copper Alloys
Density 8.8 g/cm3
CuZn10 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 89 - - - - Zn:余量
Maximum Value 0.05 0.3 91 0.05 0.02 0.1 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn10 Mechanical Properties
diameter*
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
4<d≤20 CuZn10-H050 H050 HV
50~100
1.5<d≤20 CuZn10-H095 H095 95~125
1.5<d≤10 CuZn10-H115 H115 115~155
1.5<d≤6 CuZn10-H135 H135 135~180
1.5<d≤4 CuZn10-H160 H160 ≥160
4<d≤20 CuZn10-R240 R240 ≥240 ≤150 ≥43(A100);
≥45(A11.3);
≥47(A)
1.5<d≤20 CuZn10-R320 R320 ≥320 ≥220 ≥20(A100);
≥23(A11.3);
≥25(A)
0.5<d≤10 CuZn10-R380 R380 ≥380 ≥280 ≥10(A100);
≥11(A11.3);
≥12(A)
0.5<d≤6 CuZn10-R440 R440 ≥440 ≥330 ≥4(A100);
≥5(A11.3);
0.5<d≤4 CuZn10-R530 R530 ≥530 ≥450
All specifications CuZn10-M M No specification No specification No specification No specification
1 Approximate Comparison Table Brass
China Japan United States International Organization for Standardization Germany European Standard Russia
GB JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
H90 C2200 90Cu-10Zn C22000 CuZn10 C22000 CuZn10 C22000
2.0230
CuZn10 CW501L Л90
2 Approximate Comparison Table Copper and Copper Alloy
Germany European Standard Russia
DIN EN/DIN W-Nr. EN Numerical Grade GOST
CuZn10 2.0230 CuZn10 CW501L L90

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!