Grade CuZn39Pb0,5
European Standard Steel Grade CW610N
Corresponding Standard EN 12166-2016
Copper and Copper Alloys - Wire for General Purposes
Classification Copper and Copper Alloys
Density 8.4 g/cm3
CuZn39Pb0,5 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 59 0.2 - - - Zn:余量
Maximum Value 0.2 0.3 60.5 0.8 0.05 0.2 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn39Pb0,5 Mechanical Properties
diameter*
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
1.5<d≤20 CuZn39Pb0.5-H080 H080 HV
80~110
1.5<d≤14 CuZn39Pb0.5-H100 H100 100~160
1.5<d≤8 CuZn39Pb0.5-H130 H130 ≥130
0.5<d≤20 CuZn39Pb0.5-R360 R360 ≥360 ≤300 ≥10(A100);
≥15(A11.3);
≥20(A)
0.5<d≤14 CuZn39Pb0.5-R410 R410 ≥410 ≥220 ≥8(A100);
≥10(A11.3);
≥12(A)
0.5<d≤8 CuZn39Pb0.5-R500 R500 ≥500 ≥350 ≥2(A100);
≥5(A11.3)
All specifications CuZn39Pb0.5-M M No specification No specification No specification No specification
Approximate Comparison Table Copper and Copper Alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuZn39Pb0.5 2.0372 CuZn39Pb0.5 CW610N
CuZn39Pb0,5 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!