Grade CuZn40Pb2
European Standard Steel Grade CW617N
Corresponding Standard EN 12166-2016
Copper and copper alloys - Wire for general purposes
Classification Copper and Copper Alloys
Density 8.4 g/cm3
CuZn40Pb2 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 57 1.6 - - - Zn:余量
Maximum Value 0.3 0.3 59 2.5 0.05 0.3 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn40Pb2 Mechanical Properties
diameter*
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
6<d≤20 CuZn40Pb2-H095 H095 HV
95~130
1.5<d≤14 CuZn40Pb2-H115 H115 115~170
1.5<d≤8 CuZn40Pb2-H145 H145 ≥145
6<d≤20 CuZn40Pb2-R360 R360 ≥360 ≤320
≥15(A11.3);
≥20(A)
0.5<d≤14 CuZn40Pb2-R430 R430 ≥430 ≥220 ≥6(A100);
≥8(A11.3);
≥10(A)
0.5<d≤8 CuZn40Pb2-R500 R500 ≥500 ≥350 ≥2(A100);
≥5(A11.3)
All specifications CuZn40Pb2-M M No specification No specification No specification No specification
1 Approximate Comparison Table Brass
China Japan United States International Organization for Standardization Germany European Standard Russia
GB ISC JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
HPb58-2 T38210 C3801
C38000
58Cu-40Zn-2Pb C38000 CuZn40Pb2 C38000 CuZn40Pb2 C38000
2.0402
CuZn40Pb2 CW617N ЛС58-2
2 Approximate Comparison Table Copper and Copper Alloy
Germany European Standard Russia
DIN EN/DIN W-Nr. EN Numerical Grade GOST
CuZn40Pb2 2.0402 CuZn40Pb2 CW617N LS59-2

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!