中文版
Home Material EN 12166-2016
简体 | 繁體
Grade CuZn36Sn1Pb
European Standard Steel Grade CW712R
Corresponding Standard EN 12166-2016
Copper and copper alloys - Wire for general purposes
Classification Copper and Copper Alloys
Density 8.3 g/cm3
CuZn36Sn1Pb Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Sn Other Total More
Minimum Value - - 61 0.2 1 - Zn:余量
Maximum Value 0.1 0.2 63 0.6 1.5 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn36Sn1Pb Mechanical Properties
diameter*
d
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
1.5<d≤20 CuZn36Sn1Pb-H085 H085 HV
85~125
1.5<d≤8 CuZn36Sn1Pb-H110 H110 110~140
0.5<d≤20 CuZn36Sn1Pb-R340 R340 ≥340 ≥160 ≥15(A100)，≥20(A11.3)，≥25(A)
0.1<d≤8 CuZn36Sn1Pb-R400 R400 ≥400 ≥200 ≥10(A100)，≥16(A11.3)
All specifications CuZn36Sn1Pb-M M No specification No specification No specification No specification
Approximate Comparison Table brass
China Japan United States International Organization for Standardization European Standard Russia
GB ISC JIS ASTM UNS ISO Numerical Grade EN Numerical Grade GOST
HSn62-1 T46300 C4630
C46300 		62Cu-36.5Zn-1Sn-.5Pb C46300 CuZn36Sn1Pb C46300 CuZn36Sn1Pb CW712R ЛО62-1
CuZn36Sn1Pb Corresponding Standards(Same grade name, different standards)
1 EN 12163-1998
CuZn36Sn1Pb CW712R
2 EN 12166-1998
CuZn36Sn1Pb CW712R
3 EN 12166-2016
CuZn36Sn1Pb CW712R
4 DIN EN 12163-1998
CuZn36Sn1Pb CW712R
5 DIN EN 12163-2016
CuZn36Sn1Pb CW712R
6 DIN EN 12166-2016
CuZn36Sn1Pb CW712R
7 DIN EN 12166-1998
CuZn36Sn1Pb CW712R
8 EN 12163-2016
CuZn36Sn1Pb CW712R
9 EN 12167-2024
CuZn36Sn1Pb CW712R

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!