B316 6061 - ASTM B316/B316M-2020

Grade	B316 6061
Corresponding Standard	ASTM B316/B316M-2020 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
Classification	Aluminum and Aluminum Alloys

B316 6061 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Ti	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	0.4	-	0.04	0.15	-	-	0.8	-	-	Al:余量
Maximum Value	0.7	0.8	0.15	0.35	0.4	0.15	0.25	1.2	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

B316 6061 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
1.6＜d≤25*	Solution Heat Treatment + Artificial Aging (T6)	≥290	≥240	≥9
d≤25	Strain-Hardening (H13)	150~210
d≤25	Annealing (O)	≤155

B3166061 Corresponding Standards(Same grade name, different standards)

1	ASTM B316/B316M-2015
	B316 6061
2	ASTM B316/B316M-2020
	B316 6061

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!