16Mo3 - ISO 9328-2-2018

Grade	16Mo3
Corresponding Standard	ISO 9328-2-2018 Steel Flat Products for Pressure Purposes - Non-alloy and Alloy Steels with Specified Elevated Temperature Properties
Classification	Alloy Steel

16Mo3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	0.12	-	0.4	-	-	-	-	-	0.25	-
Maximum Value	0.2	0.35	0.9	0.025	0.01	0.3	0.3	0.3	0.35	0.012

16Mo3 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤16	Normalizing (+N)	440~590	≥275	≥22	（+20℃） ≥31
16＜t≤40	Normalizing (+N)	440~590	≥270	≥22	≥31
40＜t≤60	Normalizing (+N)	440~590	≥260	≥22	≥31
60＜t≤100	Normalizing (+N)	430~580	≥240	≥22	≥31
100＜t≤150	Normalizing (+N)	420~570	≥220	≥22	≥31
150＜t≤250	Normalizing (+N)	410~570	≥210	≥22	≥31

Approximate Comparison Table Pressure-Bearing Flat Steel

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
16Mo3	16Mo3	1.5415

16Mo3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!