20MnMoNi 4-5 - ISO 9328-2-2018

Grade	20MnMoNi 4-5
Corresponding Standard	ISO 9328-2-2018 Steel Flat Products for Pressure Purposes - Non-alloy and Alloy Steels with Specified Elevated Temperature Properties
Classification	Alloy Steel

20MnMoNi 4-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N	V
Minimum Value	0.15	-	1	-	-	-	0.4	-	0.45	-	-
Maximum Value	0.23	0.4	1.5	0.02	0.01	0.2	0.8	0.2	0.6	0.012	0.02

20MnMoNi 4-5 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤40	Quenching and Tempering (+QT)	590~750	≥470	≥18	（-20℃） ≥27
40＜t≤60	Quenching and Tempering (+QT)	590~730	≥460	≥18	≥27
60＜t≤100	Quenching and Tempering (+QT)	570~710	≥450	≥18	≥27
100＜t≤150	Quenching and Tempering (+QT)	570~710	≥440	≥18	≥27
150＜t≤250	Quenching and Tempering (+QT)	560~700	≥400	≥18	≥27

Approximate Comparison Table Pressure-Bearing Flat Steel

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
20MnMoNi 4-5	20MnMoNi 4-5	1.6311

20MnMoNi4-5 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!