Ni99.6 2.4060 - DIN 17750-2002

Grade	Ni99.6
Germany W-Nr.	2.4060
Corresponding Standard	DIN 17750-2002 Wrought nickel and nickel alloy sheet，plate and strip Requirements and testing
Classification	Other metal materials
Properties	Corrosion Resistance
Density	8.9 g/cm³

Ni99.6 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cu	Ti	Co	Mg	More
Minimum Value	-	-	-	-	-	-	-	-	-	Ni+Co≥99.6
Maximum Value	0.25	0.08	0.15	0.35	0.005	0.15	0.1	1	0.15	Ni+Co≥99.6

Ni99.6 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Strip steel; 0.2<t≤2.5	Softening Annealing (F37)	≥370	≥100	≥40	≤130
Thin plate and thick plate; 0.3<t≤50	Softening Annealing (F37)	≥370	≥100	≥40	≥130
Strip steel; 0.2<t≤2.5	1/2-Hard (F49)	≥490	≥290	≥15	150
Strip steel; 0.3 < t ≤ 2.5	1/2-Hard (F49)	≥490	≥290	≥15	150
Strip steel; 0.2<t≤2.5	Hard (F59)	≥590	≥490	≥2	200
Strip steel; 0.3 < t ≤ 2.5	Hard (F59)	≥590	≥490	≥2	200

Approximate Comparison Table Corrosion-Resistant Alloy

Ni99.6 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!