LC-Ni99.2 2.4068 - DIN 17750-2002

Grade	LC-Ni99.2
Germany W-Nr.	2.4068
Corresponding Standard	DIN 17750-2002 Wrought nickel and nickel alloy sheet，plate and strip Requirements and testing
Classification	Other metal materials
Properties	Corrosion Resistance
Density	8.9 g/cm³

LC-Ni99.2 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cu	Ti	Co	Mg	More
Minimum Value	-	-	-	-	-	-	-	-	-	Ni+Co≥99.2
Maximum Value	0.4	0.02	0.25	0.35	0.005	0.25	0.1	1	0.15	Ni+Co≥99.2

LC-Ni99.2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Strip steel; 0.2<t≤2.5	Soft Annealing (F34)	≥340	≥80	≥40	≤130
Thin plate and thick plate; 0.3<t≤50	Soft Annealing (F34)	≥340	≥80	≥40	≤130
Strip steel; 0.2<t≤2.5	1/2 Hard (F43)	≥430	≥150	≥15	150
Thin and Thick Plate; 0.3<t≤2.5	1/2 Hard (F43)	≥430	≥150	≥15	150
Strip steel; 0.2<t≤2.5	Hard (F54)	≥540	≥430	≥5	180
Thin and Thick Plate; 0.3<t≤2.5	Hard (F54)	≥540	≥430	≥5	180

LC-Ni99.2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!