NiMn2 2.4110 - DIN 17750-2002

Grade	NiMn2
Germany W-Nr.	2.4110
Corresponding Standard	DIN 17750-2002 Wrought nickel and nickel alloy sheet，plate and strip Requirements and testing
Classification	Alloy Steel
Density	8.8 g/cm³

NiMn2 Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cu	Ti	Co	Mg	More
Minimum Value	-	-	-	1.5	-	-	-	-	-	Ni+Co≥97
Maximum Value	0.35	0.05	0.25	2.5	0.01	0.25	0.1	1	0.15	Ni+Co≥97

NiMn2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Strip steel; 0.2<t≤2.5	Soft annealing (F40)	≥400	≥140	≥40	≤130
Strip steel; 0.2<t≤2.5	1/2-Hard (F54)	≥540	≥340	≥20	160
Strip steel; 0.2<t≤2.5	Hard (F74)	≥740	≥600	≥2	220

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!