中文版
Home/ Material/ DIN 17750-2002
简体 | 繁體
Grade NiCr2MnSi
Germany W-Nr. 2.4146
Corresponding Standard DIN 17750-2002
Wrought nickel and nickel alloy sheet，plate and strip Requirements and testing
Brand/Supplier
Germany -> VDM Metals
Classification Alloy Steel
Density 8.8 g/cm3
NiCr2MnSi Chemical Element Composition Content (%)
  Component Fe C Si Mn S Cr Cu Ti Co More
标准 Minimum Value - - 0.4 1.3 - 1.4 - - - Ni+Co≥95.5
Maximum Value 0.3 0.05 0.65 1.8 0.005 1.8 0.15 0.1 1
Nominal Value - - - - - - - - -
  Component Si Mn Cr Ni More
VDM Minimum Value - - - -  
Maximum Value - - - -
Nominal Value 0.5 1.5 2 96
NiCr2MnSi Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Strip steel; 0.2<t≤2.5 Soft annealing (F42) ≥420 ≥140 ≥40

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!