NiCr29Fe 2.4642 - DIN 17750-2002

Grade	NiCr29Fe
Germany W-Nr.	2.4642
Corresponding Standard	DIN 17750-2002 Wrought nickel and nickel alloy sheet，plate and strip Requirements and testing
Classification	Alloy Steel
Properties	Corrosion Resistance
Density	8.2 g/cm³

NiCr29Fe Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Ti	Al	More
Minimum Value	7	-	-	-	-	-	27	-	-	-	Ni:余量
Maximum Value	11	0.05	0.5	0.5	0.02	0.015	31	0.5	0.5	0.5	Ni:余量

NiCr29Fe Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Strip steel; 0.2<t≤2.5	Solution treatment (F59)	≥590	≥240	≥30
Thin plate and thick plate; 1<t≤50	Solution treatment (F59)	≥590	≥240	≥30

NiCr29Fe Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!