NiCr25FeAlYC 2.4647 - DIN 17750-2002

Grade	NiCr25FeAlYC
Germany W-Nr.	2.4647
Corresponding Standard	DIN 17750-2002 Wrought nickel and nickel alloy sheet，plate and strip Requirements and testing
Classification	Alloy Steel
Properties	Corrosion Resistance
Density	7.9 g/cm³

NiCr25FeAlYC Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	P	S	Cr	Cu	Ti	Zr	Al	Y	More
Minimum Value	8	0.2	-	-	-	-	24	-	0.1	0.01	2.4	0.05	Ni:余量
Maximum Value	11	0.4	0.5	0.1	0.02	0.015	26	0.15	0.25	0.1	3	0.15	Ni:余量

NiCr25FeAlYC Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Reduction of Area ψ %
Strip steel; 0.2<t≤2.5	Solid Solution Treatment (F68)	≥680	≥270	≥20	≤220
Thin plate and thick plate; 1<t≤50	Solid Solution Treatment (F68)	≥680	≥270	≥20	≤220

NiCr25FeAlYC Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!