LC-NiCu30Fe 2.4361 - DIN 17750-2002

Grade	LC-NiCu30Fe
Germany W-Nr.	2.4361
Corresponding Standard	DIN 17750-2002 Wrought nickel and nickel alloy sheet，plate and strip Requirements and testing
Classification	Nickel and Nickel Alloys
Properties	Corrosion Resistance
Density	8.8 g/cm³

LC-NiCu30Fe Chemical Element Composition Content (%)

Component	Fe	C	Si	Mn	S	Cu	Ti	Co	Al	More
Minimum Value	1	-	-	-	-	28	-	-	-	Ni+Co≥63
Maximum Value	2.5	0.04	0.3	2	0.02	34	0.3	1	0.5	Ni+Co≥63

LC-NiCu30Fe Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Thin plate and thick plate; 1<t≤50	Soft annealing (F43)	≥430	≥160	≥35	≤120
Strip steel; 0.2<t≤2.5	Solution treatment + aging hardening (F85)	≥850	≥600	≥15

LC-NiCu30Fe Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!