FeE 420 AR - ISO 6930-2-2004

Grade	FeE 420 AR
Corresponding Standard	ISO 6930-2-2004 High Yield Strength Steel Plates and Wide Flats for Cold Forming - Normalized, Normalized Rolled and As-Rolled Steels
Classification	Alloy Steel

FeE 420 AR Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^①	Ti ^③	V ^③	Nb ^③	Al ^②
Minimum Value	-	-	-	-	-	-	-	-	-
Maximum Value	0.2	0.55	1.65	0.025	0.015	0.15	0.1	0.09	0.015

① If agreed upon at the time of enquiry and order, the sulfur content (mass fraction) shall be decreased to a maximum value of 0,010 % (ladle analysis).
② If agreed upon at the time of enquiry and order, the minimum content of total aluminium (mass fraction) does not apply when other grain-refining elements are present in sufficient quantity.
③The sum of niobium, vanadium, titanium contents (mass fractions) shall be a maximum of 0,22 %.

FeE 420 AR Mechanical Properties

Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
as rolled (AR)	≥490	≥420	≥23

• Mechanical properties for thickness up to 20 mm

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!