41CrAlMo7-10 - ISO 683-5-2017

Grade	41CrAlMo7-10
Corresponding Standard	ISO 683-5-2017 Heat-Treatable Steels, Alloy Steels and Free-Cutting Steels-- Part 5: Nitriding Steels
Classification	Alloy Steel

41CrAlMo7-10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Mo	Al
Minimum Value	0.38	-	0.4	-	-	1.5	0.2	0.8
Maximum Value	0.45	0.4	0.7	0.025	0.035	1.8	0.35	1.2

41CrAlMo7-10 Mechanical Properties

	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
16≤d≤40, 8≤t≤20	Quenching and Tempering	1030~1230	≥835	≥10	≥25
40≤d≤100, 20≤t≤60	Quenching and Tempering	980~1190	≥835	≥10	≥25
100≤d≤160, 60≤t≤100	Quenching and Tempering	930~1130	≥735	≥12	≥30
160≤d≤250, 100≤t≤160	Quenching and Tempering	880~1080	≥675	≥12	≥30

Approximate Comparison Table Nitriding Steels

China	Japan	International Organization for Standardization	European Standard
GB	JIS	ISO	EN	Numerical Grade
38CrMoAl	SACM645	41CrAlMo7-10	41CrAlMo7-10	1.8509

41CrAlMo7-10 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!