CuBe2 CW101C - DIN EN 12163-2016

Grade	CuBe2
Germany W-Nr.	CW101C
Corresponding Standard	DIN EN 12163-2016 Copper and copper alloys – Rod for general purposes
Classification	Copper and Copper Alloys
Density	8.3 g/cm³

CuBe2 Chemical Element Composition Content (%)

Component	Fe	Be	Ni	Co	Other Total	More
Minimum Value	-	1.8	-	-	-	Cu:余量
Maximum Value	0.2	2.1	0.3	0.3	0.5	Cu:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

CuBe2 Mechanical Properties

diameter/width arcoss-flats d/t mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
25<d/t≤80	CuBe2-R1150	R1150	≥1150	≥1000	≥2(A)
25<d/t≤80	CuBe2-H340	H340				340~410
2≤d/t≤25	CuBe2-R1300	R1300	≥1300	≥1100	≥2(A)
2≤d/t≤25	CuBe2-H350	H350				350~430
All specifications	CuBe2-M	M	No specification	No specification	No specification	No specification

①Material condition names and character codes:
H - Hardness (Brinell or Vickers hardness), with the suffix number indicating the hardness value.
R - Tensile strength, with the suffix number indicating the minimum tensile strength value.
M - Manufactured without specified mechanical properties.
Refer to standard EN 1173-2008.
②A100、A11.3、A-gauge length

New and Old Grade Replacement List

Corresponding Standard	Grade
DIN 17672-1-1983	Grade Germany W-Nr.
DIN EN 12163-1998	Grade Germany W-Nr. Old Grade
DIN EN 12163-2016	Grade Germany W-Nr.

1 Approximate Comparison Table Processing of High Copper Alloys

China		Japan	United States		International Organization for Standardization		Germany		European Standard		Russia
GB	ISC	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	Numerical Grade	GOST
TBe2 QBe2	T17720	C1720 C17200	97.8Cu-1.9Be-.3Co	C17200	CuBe2	C17200	CuBe2	C17200 2.1247	CuBe2	CW101C	БрБН2

2 Approximate Comparison Table Copper and Copper Alloy

Germany		European Standard
DIN EN/DIN	W-Nr.	EN	Numerical Grade
CuBe2	2.1247	CuBe2	CW101C

CuBe2 Corresponding Standards(Same grade name, different standards)

1	EN 12163-1998
	CuBe2 CW101C
2	EN 12166-1998
	CuBe2 CW101C
3	EN 1654-1998
	CuBe2 CW101C
4	EN 12166-2016
	CuBe2 CW101C
5	DIN 17672-1-1983
	CuBe2 2.1247
6	DIN EN 12163-1998
	CuBe2 CW101C (2.1247)
7	DIN EN 12163-2016
	CuBe2 CW101C
8	DIN EN 12166-2016
	CuBe2 CW101C
9	DIN EN 12166-1998
	CuBe2 CW101C
10	DIN 17666-1983
	CuBe2 2.1247
11	EN 12163-2016
	CuBe2 CW101C
12	DIN 2076-1984
	CuBe2
13	EN 12167-2024
	CuBe2 CW101C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!