中文版
Home Material DIN EN 12163-2016
简体 | 繁體
Grade CuSn6
Germany W-Nr. CW452K
Corresponding Standard DIN EN 12163-2016
Copper and copper alloys – Rod for general purposes
Classification Copper and Copper Alloys
Density 8.8 g/cm3
CuSn6 Chemical Element Composition Content (%)
Component Fe P Ni Pb Zn Sn Other Total More
Minimum Value - 0.01 - - - 5.5 - Cu:余量
Maximum Value 0.1 0.4 0.2 0.02 0.2 7 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuSn6 Mechanical Properties
diameter/width arcoss-flats
d/t
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
2<d/t≤60 CuSn6-R340 R340 ≥340 ≤270 ≥35(A100)，
≥40(A11.3)，
≥45(A)
2<d/t≤60 CuSn6-H080 H080 80~110
2<d/t≤40 CuSn6-R420 R420 ≥420 ≥220 ≥25(A11.3)，
≥30(A)
2<d/t≤40 CuSn6-H120 H120 120~155
2<d≤8 CuSn6-R520 R520 ≥520 ≥400 ≥4(A100)，
≥5(A11.3)
2<d≤8 CuSn6-H150 H150 150~180
2<d≤4 CuSn6-R700 R700 ≥700 ≥600
2<d≤4 CuSn6-H180 H180 180~215
All specifications CuSn6-M M No specification No specification No specification No specification
①Material condition names and character codes:
H - Hardness (Brinell or Vickers hardness), with the suffix number indicating the hardness value.
R - Tensile strength, with the suffix number indicating the minimum tensile strength value.
M - Manufactured without specified mechanical properties.
Refer to standard EN 1173-2008.
②A100、A11.3、A-gauge length
New and Old Grade Replacement List
Corresponding Standard Grade
DIN 17672-1-1983
Grade
Germany W-Nr.
DIN EN 12163-1998
Grade
Germany W-Nr.
Old Grade
DIN EN 12163-2016
Grade
Germany W-Nr.
1 Approximate Comparison Table bronze
China United States International Organization for Standardization Germany Russia
GB ISC ASTM ISO DIN EN/DIN GOST
QSn6.5-0.4 T51520 94Cu-6Sn-.4P CuSn6 CuSn6 БрОФ6.5-0.4
2 Approximate Comparison Table Cupper and cupper alloy
Japan United States International Organization for Standardization Germany France European Standard Russia Sweden United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. NF EN/NF EN Numerical Grade GOST SS BS EN/BS
C5191 C51900 CuSn6 CuSn6 2.1020 CuSn6P CuSn6 CW452K BrOF6.5-0.15 CuSn6 PB102
CuSn6 Corresponding Standards(Same grade name, different standards)
1 EN 12163-1998
CuSn6 CW452K
2 EN 12166-1998
CuSn6 CW452K
3 EN 1654-1998
CuSn6 CW452K
4 EN 12166-2016
CuSn6 CW452K
5 DIN 17672-1-1983
CuSn6 2.1020
6 DIN EN 12163-1998
CuSn6 CW452K (2.1020)
7 DIN EN 12163-2016
CuSn6 CW452K
8 DIN 17671-1-1983
CuSn6 2.1020
9 DIN EN 12166-2016
CuSn6 CW452K
10 DIN EN 12166-1998
CuSn6 CW452K
11 ISO 427-1983
CuSn6
12 EN 12163-2016
CuSn6 CW452K
13 DIN 2076-1984
CuSn6
14 EN 12167-2024
CuSn6 CW452K
15 DIN EN 12449-2019
CuSn6 CW452K
16 EN 12449-2023
CuSn6 CW452K

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!