中文版
Home Material DIN EN 12163-2016
简体 | 繁體
Grade CuZn36
Germany W-Nr. CW507L
Corresponding Standard DIN EN 12163-2016
Copper and copper alloys – Rod for general purposes
Classification Copper and Copper Alloys
Density 8.4 g/cm3
CuZn36 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 63.5 - - - - Zn:余量
Maximum Value 0.05 0.3 65.5 0.05 0.02 0.1 0.1
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn36 Mechanical Properties
diameter/width arcoss-flats
d/t
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
4<d/t≤80 CuZn36-R290 R290 ≥290 ≤230 ≥40(A11.3)，
≥45(A)
4<d/t≤80 CuZn36-H070 H070 70~110
4<d≤40;4<t≤35 CuZn36-R370 R370 ≥370 ≥240 ≥12(A11.3)，
≥14(A)
4<d≤40;4<t≤35 CuZn36-H105 H105 105~145
4<d≤8;4<t≤6 CuZn36-R460 R460 ≥460 ≥330 ≥6(A11.3)，
≥8(A)
4<d≤8;4<t≤6 CuZn36-H140 H140 ≥140
All specifications CuZn36-M M No specification No specification No specification No specification
①Material condition names and character codes:
H - Hardness (Brinell or Vickers hardness), with the suffix number indicating the hardness value.
R - Tensile strength, with the suffix number indicating the minimum tensile strength value.
M - Manufactured without specified mechanical properties.
Refer to standard EN 1173-2008.
②A100、A11.3、A-gauge length
1 Approximate Comparison Table brass
China Japan United States International Organization for Standardization Germany European Standard Russia
GB JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
H65 C2700 65Cu-35Zn C27000 CuZn36 C27000 CuZn36 C27000
2.0335 		CuZn36 CW507L Л65
2 Approximate Comparison Table Cupper and cupper alloy
Japan United States International Organization for Standardization Germany European Standard Russia Sweden United Kingdom
JIS UNS ISO DIN EN/DIN W-Nr. EN Numerical Grade GOST SS BS EN/BS
C2720 C27400 CuZn37 CuZn36
CuZn37 		2.0335 CuZn36 CW507L l63 CuZn37 CZ108
3 Approximate Comparison Table brass
China Japan United States International Organization for Standardization Germany United Kingdom
GB JIS ASTM ISO DIN EN/DIN BS EN/BS
H65 C2700 C27000 CuZn35 CuZn36 CZ107
CuZn36 Corresponding Standards(Same grade name, different standards)
1 EN 12163-1998
CuZn36 CW507L
2 EN 12166-1998
CuZn36 CW507L
3 EN 1654-1998
CuZn36 CW507L
4 EN 12166-2016
CuZn36 CW507L
5 DIN EN 12163-1998
CuZn36 CW507L
6 DIN EN 12163-2016
CuZn36 CW507L
7 DIN 17671-1-1983
CuZn36 2.0335 (Ms63)
8 DIN EN 12166-2016
CuZn36 CW507L
9 DIN EN 12166-1998
CuZn36 CW507L
10 DIN 17660-1983
CuZn36 2.0335 (Ms63)
11 EN 12163-2016
CuZn36 CW507L
12 DIN 2076-1984
CuZn36
13 EN 12167-2024
CuZn36 CW507L
14 DIN EN 12449-2019
CuZn36 CW507L
15 EN 12449-2023
CuZn36 CW507L

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!