中文版
Home Material DIN EN 12163-2016
简体 | 繁體
Grade CuZn31Si1
Germany W-Nr. CW708R
Corresponding Standard DIN EN 12163-2016
Copper and copper alloys – Rod for general purposes
Classification Copper and Copper Alloys
Density 8.4 g/cm3
CuZn31Si1 Chemical Element Composition Content (%)
Component Fe Si Ni Cu Pb Other Total More
Minimum Value - 0.7 - 66 - - Zn:余量
Maximum Value 0.4 1.3 0.5 70 0.8 0.5
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn31Si1 Mechanical Properties
diameter/width arcoss-flats
d/t
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
5<d/t≤40 CuZn31Si1-R460 R460 ≥460 ≥240 ≥18(A11.3)，
≥22(A)
5<d/t≤40 CuZn31Si1-H120 H120 120~160
5<d/t≤14 CuZn31Si1-R530 R530 ≥530 ≥350 ≥10(A11.3)，
≥12(A)
5<d/t≤14 CuZn31Si1-H140 H140 ≥140
All specifications CuZn31Si1-M M No specification No specification No specification No specification
①Material condition names and character codes:
H - Hardness (Brinell or Vickers hardness), with the suffix number indicating the hardness value.
R - Tensile strength, with the suffix number indicating the minimum tensile strength value.
M - Manufactured without specified mechanical properties.
Refer to standard EN 1173-2008.
②A100、A11.3、A-gauge length
Approximate Comparison Table Cupper and cupper alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuZn31Si1 2.0490 CuZn31Si1 CW708R
CuZn31Si1 Corresponding Standards(Same grade name, different standards)
1 EN 12163-1998
CuZn31Si1 CW708R
2 DIN 17672-1-1983
CuZn31Si1 2.0490 (CuZn31Si) (SoMs68)
3 DIN EN 12163-1998
CuZn31Si1 CW708R (2.0490)
4 DIN EN 12163-2016
CuZn31Si1 CW708R
5 DIN 17671-1-1983
CuZn31Si1 2.0490 (CuZn31Si) (SoMs68)
6 DIN 17660-1983
CuZn31Si1 2.0490 (CuZn31Si) (SoMs68)
7 EN 12163-2016
CuZn31Si1 CW708R
8 DIN EN 12449-2019
CuZn31Si1 CW708R
9 EN 12449-2023
CuZn31Si1 CW708R

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!