Grade CuCo2Be
Germany W-Nr. 2.1285
Corresponding Standard DIN 17672-1-1983
Wrought copper and copper alloys bars;Properties.
Classification Copper and Copper Alloys
Density 8.8 g/cm3
CuCo2Be Chemical Element Composition Content (%)
Component Be Co Other Total More
Minimum Value 0.4 2 - Cu:余量;Ni+Fe≤0.5
Maximum Value 0.7 2.8 0.5
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuCo2Be Mechanical Properties
diameter/thickness
d
mm
Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa
Yield Point
σs
Mpa
Elongation or Extension Rate
δ
%
Hardness
HBW
Round products; 2<d≤60 2.1285.40 Solution F25 (.40) 250~370 140~210 ≥20(AL=100) HV 70~100
Round products; 2<d≤60 2.1285.60 Solution + Artificial Aging F65 (.60) 650~800 500~650 ≥8(AL=100) HV 195~235
Rounds; 2<d≤25 2.1285.56 Solution Heat Treatment Cold Worked to Hard F50 (.56) 500~600 430~530 - HV 140~180
Rounds; 25<d≤35 2.1285.56 Solution Heat Treatment Cold Worked to Hard F50 (.56) 450~550 380~480 - HV 130~180
Rounds; 2<d≤25 2.1285.76 Solution Heat Treatment + Cold Work Hardened + Artificial Aging F80 (.76) 800~950 730~880 - HV 220~260
Rounds; 25<d≤35 2.1285.76 Solution Heat Treatment + Cold Work Hardened + Artificial Aging F80 (.76) 750~900 680~830 - HV 210~260
Squares, hexagons; d≤55 2.1285.40 Solution F25 (.40) 250~370 140~210 ≥20(AL=100) HV 70~100
Squares, hexagons; d≤55 2.1285.60 Solution + Artificial Aging F65 (.60) 650~800 500~650 ≥8(AL=100) HV 195~235
Square and hexagonal products; d≤20 2.1285.56 Solution Heat Treatment Cold Worked to Hard F50 (.56) 500~600 430~530 - HV 140~180
Squares, hexagons; 20<d≤30 2.1285.56 Solution Heat Treatment Cold Worked to Hard F50 (.56) 450~550 380~480 - HV 130~180
Square and hexagonal products; d≤20 2.1285.76 Solution Heat Treatment + Cold Work Hardened + Artificial Aging F80 (.76) 800~950 730~880 - HV 220~260
Squares, hexagons; 20<d≤30 2.1285.76 Solution Heat Treatment + Cold Work Hardened + Artificial Aging F80 (.76) 750~900 680~830 - HV 210~260
Flat products; d≤50 2.1285.40 Solution F25 (.40) 250~370 140~210 ≥20(AL=100) HV 70~100
Flat products; d≤50 2.1285.60 Solution + Artificial Aging F65 (.60) 650~800 500~650 ≥8(AL=100) HV 195~235
Flat material; 15<d≤25 2.1285.56 Solution Heat Treatment Cold Worked to Hard F50 (.56) 500~600 430~530 - HV 140~180
Flat material; 15<d≤25 2.1285.56 Solution Heat Treatment Cold Worked to Hard F50 (.56) 450~550 380~480 - HV 130~180
Flat material; d≤20 2.1285.76 Solution Heat Treatment + Cold Work Hardened + Artificial Aging F80 (.76) 800~950 730~880 - HV 220~260
Flat material; 15<d≤25 2.1285.76 Solution Heat Treatment + Cold Work Hardened + Artificial Aging F80 (.76) 750~900 680~830 - HV 210~260
New and Old Grade Replacement List
1 Approximate Comparison Table Processing of high copper alloy
China Japan United States International Organization for Standardization Germany European Standard Russia
GB ISC JIS ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST
TBe0.6-2.5
QBe0.6-2.5
C17500 C1750
C17500
97Cu-.5Be-2.5Co C17500 CuCo2Be C17500 CuCo2Be C17500
2.1285
CuCo2Be CW104C БрБК0.6-2.5
2 Approximate Comparison Table Cupper and cupper alloy
Germany European Standard
DIN EN/DIN W-Nr. EN Numerical Grade
CuCo2Be 2.1285 CuCo2Be CW104C

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!