18MnMo4-5 1.5414 - EN 10028-2-2009

Grade	18MnMo4-5
European Standard Steel Grade	1.5414
Corresponding Standard	EN 10028-2-2009 Flat products made of steels for pressure purposes Part 2 Non-alloy and alloy steels with specified elevated temperature properties
Classification	Alloy Steel

18MnMo4-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^⑤	Mo	N
Minimum Value	-	-	0.9	-	-	-	-	-	0.45	-
Maximum Value	0.2	0.4	1.5	0.015	0.005	0.3	0.3	0.3	0.6	0.012

18MnMo4-5 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤60	Normalizing and Tempering (+NT)	510~650	≥345	≥20	* ≥40
60＜t≤150	Normalizing and Tempering (+NT)	510~650	≥325	≥20	≥40
150＜t≤250	Tempering (+QT)	480~620	≥310	≥20	≥40

Approximate Comparison Table

China	International Organization for Standardization	European Standard
GB	ISO	EN	Numerical Grade
18MnMoNbR	18MnMo4-5	18MnMo4-5	1.5414

18MnMo4-5 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!