中文版
Home Material DIN 17671-1-1983
简体 | 繁體
Grade CuZn38Pb1.5
Germany W-Nr. 2.0371
Old Grade
Corresponding Standard DIN 17671-1-1983
Wrought copper and copper alloys tube；Properties.
Classification Copper and Copper Alloys
Properties Good Forgability
Density 8.4 g/cm3
CuZn38Pb1.5 Chemical Element Composition Content (%)
Component Fe Ni Cu Pb Al Sn Other Total More
Minimum Value - - 59.5 1 - - - Zn:余量
Maximum Value 0.3 0.3 61.5 2 0.05 0.2 0.2
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
CuZn38Pb1.5 Mechanical Properties
thickness
t
mm		 Mark
Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
% 		Hardness
HBW
Pipe; wall thickness as per agreement 2.0371.08 Extrusion or Hot Forged Tubes P (.08) No specification No specification No specification No specification
Pipes; t<10 2.0371.10 Soft F34 (.10) ≥340 ≤220 ≥35 ≈80
Pipes; t<10 2.0371.26 Half Hard F41 (.26) ≥410 ≥220 ≥15 ≈115
Pipes; t<5 2.0371.30 Hard F47 (.30) ≥470 ≥350 ≥10 ≈140
1 Approximate Comparison Table Brass
China United States International Organization for Standardization Germany European Standard Russia United Kingdom
GB ISC ASTM UNS ISO Numerical Grade DIN EN/DIN W-Nr. EN Numerical Grade GOST Commercial Grade BS EN/BS
HPb60-2 C37700 60Cu-38Zn-2Pb C37700 CuZn38Pb2 C37700 CuZn38Pb1.5 C37700
2.0371 		CuZn38Pb2 CW608N ЛС60-2 CZ120 C37700
2 Approximate Comparison Table Copper and Copper Alloy
Japan United States International Organization for Standardization Germany European Standard Russia Sweden United Kingdom
JIS UNS ISO DIN EN/DIN EN Numerical Grade GOST SS BS EN/BS
C3710 C37000 CuZn39Pb1 CuZn38Pb1.5 CuZn38Pb1 CW607N LS59-1 CuZn38Pb1 CZ129
CuZn38Pb1.5 Corresponding Standards(Same grade name, different standards)
1 DIN 17672-1-1983
CuZn38Pb1.5 2.0371 Ms60Pb
2 DIN 17671-1-1983
CuZn38Pb1.5 2.0371 (Ms60Pb)
3 DIN 17660-1983
CuZn38Pb1.5 2.0371 Ms60Pb

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!