AlCuMgPb 3.1645 - DIN 1725-1-1983

Grade	AlCuMgPb
Commercial Grade
Germany W-Nr.	3.1645
Corresponding Standard	DIN 1725-1-1983 Aluminium alloy ; wrought alloys
Classification	Aluminum and Aluminum Alloys
Density	2.85 g/cm³

AlCuMgPb Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Ni	Cu	Ti	Pb	Zn	Sn	Mg	Bi	Other Individual	Other Total	More
Minimum Value	-	-	0.5	-	-	3.3	-	0.8	-	-	0.4	-	-	-	Al:余量
Maximum Value	0.8	0.8	1	0.1	0.2	4.6	0.2	1.5	0.8	0.2	1.8	0.2	0.1	0.3	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Approximate Comparison Table Aluminium and Aluminium Alloy

International Organization for Standardization	Germany	France	European Standard
ISO	DIN EN/DIN	NF EN/NF	EN	Numerical Grade
AlCu4PbMg	AlCuMgPb	2030	ENAW-AlCu4PbMg	ENAW-2030

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!