X2CrNiMnMoN 25-18-6-5 1.4565 - EN 10088-2-2005

Grade	X2CrNiMnMoN 25-18-6-5
European Standard Steel Grade	1.4565
Corresponding Standard	EN 10088-2-2005 Stainless steels – Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X2CrNiMnMoN 25-18-6-5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Mo	N	Nb
Minimum Value	-	-	5	-	-	24	16	4	0.3	-
Maximum Value	0.03	1	7	0.03	0.015	26	19	5	0.6	0.15

X2CrNiMnMoN 25-18-6-5 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤6; (Transverse)	Cold Rolled Steel Strip (C) and Solution Annealing	800~950	②③ ≥420	②④⑤ ≥30	≥90
t≤10; (Transverse)	Hot Rolled Steel Strip (H) and Solution Annealing	800~950	≥420	≥30	≥90
t≤40; (Transverse)	Hot Rolled Medium Thick Plate (P) and Solution Annealing	800~950	≥420	≥30	≥90
t≤10; (Longitudinal)	Hot Rolled Steel Strip (H) and Solution Annealing				≥120
t≤40; (Longitudinal)	Hot Rolled Medium Thick Plate (P) and Solution Annealing				≥120

1 Approximate Comparison Table Austenitic Stainless Steel

China	United States	International Organization for Standardization		European Standard
ISC	UNS	ISO	Numerical Grade	Numerical Grade
S34553	S34565	X2CrNiMnMoN25-18-6-5	4565-345-65-I	1.4565

2 Approximate Comparison Table Austenitic Stainless Steel

X2CrNiMnMoN25-18-6-5 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!