DC03 1.0347 - DIN EN 10130-2006

Grade	DC03
Germany W-Nr.	1.0347
Corresponding Standard	DIN EN 10130-2006 Cold Rolled Low Carbon Steel Flat Products for Cold Forming-Technical Delivery Condition
Classification	Carbon Steel

DC03 Chemical Element Composition Content (%)

Component	C	Mn	P	S
Minimum Value	-	-	-	-
Maximum Value	0.1	0.45	0.035	0.035

DC03 Mechanical Properties

condition	Mark	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Cold-rolled flat material; flat; t ≥ 0.35 or w ≥ 600	Surface type A/B	270~370	140~240	≥34

DC03 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!