5052 - GB /T 3195-2016

Grade	5052
Corresponding Standard	GB /T 3195-2016 Aluminium and aluminium alloys drawn round wires
Classification	Aluminum and Aluminum Alloys
Properties	Corrosion Resistance Forgability Weldability

5052 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	-	0.15	-	-	2.2	-	-	Al余量
Maximum Value	0.4	0.25	0.1	0.35	0.1	0.1	2.8	0.05	0.15	Al余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

Chemical composition according to GB/T 3190-2008

5052 Mechanical Properties

diameter d mm	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa
1.6~25	5052-O	Annealing (O)	≤220

①T6-solution heat treatment and artificial aging

Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China		United States		International Organization for Standardization		Germany		European Standard	Russia
GB	ISC	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	GOST
5A02 (LF2)	5052	5052	A95052	AlMg2.5	A95052	AlMg2.5	3.3523 A95052	EN-AW-AlMg2.5	АМг2.5

5052 Corresponding Standards(Same grade name, different standards)

1	GB /T 3190-2008
	5052
2	JIS H 4040-2006
	5052 A5052 BD A5052 BE A5052 W
3	GB /T 3195-2016
	5052
4	DIN 1725-1-1983
	5052 AlMg2.5 3.3523
5	GB /T 3190-2020
	5052
6	JIS H 4040-2015
	5052 A5052 BD A5052 BE A5052 W
7	GB /T 3191-2019
	5052
8	GB /T 3880.1-2012
	5052

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!