X12CrMo5 1.7362 - EN 10028-2-2009

Grade	X12CrMo5
European Standard Steel Grade	1.7362
Corresponding Standard	EN 10028-2-2009 Flat products made of steels for pressure purposes Part 2 Non-alloy and alloy steels with specified elevated temperature properties
Classification	Alloy Steel

X12CrMo5 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^⑤	Mo	N
Minimum Value	0.1	-	0.3	-	-	4	-	-	0.45	-
Maximum Value	0.15	0.5	0.6	0.02	0.005	6	0.3	0.3	0.65	0.012

X12CrMo5 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤60	Normalizing and Tempering (+NT)	510~690	≥320	≥20	* ≥40
60＜t≤150	Normalizing and Tempering (+NT)	480~660	≥300	≥20	≥40
150＜t≤250	Quenching and Tempering (+QT)	450~630	≥300	≥20	≥40

Approximate Comparison Table Pressure-Bearing Flat Steel

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
X12CrMo5	X12CrMo5	1.7362

X12CrMo5 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!