P460NH 1.8935 - EN 10028-3-2009

Grade	P460NH
European Standard Steel Grade	1.8935
Corresponding Standard	EN 10028-3-2009 Flat products made of steels for pressure purposes Part 3 Weldable fine grain steels, normalized
Classification	Alloy Steel

P460NH Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N	Ti	V	Nb	Al	More
Minimum Value	-	-	1.1	-	-	-	-	-	-	-	-	-	-	0.02	Nb+Ti+V: ≤ 0.22
Maximum Value	0.2	0.6	1.7	0.025	0.01	0.3	0.8	0.7	0.1	0.025	0.03	0.2	0.05	-	Nb+Ti+V: ≤ 0.22

P460NH Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t≤20	Normalizing (+N)	630~725	≥460	≥17
20＜t≤40	Normalizing (+N)	570~720	≥445	≥17
40＜t≤60	Normalizing (+N)	570~720	≥430	≥17
60＜t≤100	Normalizing (+N)	540~710	≥400
100＜t≤250	Normalizing (+N)	Agreed upon when ordering	Agreed upon when ordering	Agreed upon when ordering

1 Approximate Comparison Table

International Organization for Standardization		European Standard
ISO	Numerical Grade	EN	Numerical Grade
P460NH	1.8935	P460NH	1.8935

2 Approximate Comparison Table structural alloy steel

3 Approximate Comparison Table

China	International Organization for Standardization	European Standard
GB	ISO	EN
Q460R GB/T 713.2-2023	P460NH P460NL1 ISO 9328-2018	P460NH P460NL1 EN 10028-2017

P460NH Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!