TA5 Ti-4Al-0.005B - GB /T 3621-2007

Grade	TA5
Other Names
Corresponding Standard	GB /T 3621-2007 Titanium and Titanium Alloy Plate and Sheet
Classification	Titanium and Titanium Alloys

TA5 Chemical Element Composition Content (%)

Component	Fe	C	N	B	Al	H	O	Other Individual	Other Total	More
Minimum Value	-	-	-	-	3.3	-	-	-	-	Ti:余量
Maximum Value	0.3	0.08	0.04	0.005	4.7	0.015	0.15	0.1	0.4	Ti:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

TA5 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Hot-rolled, Cold-rolled sheet; 0.5≤t≤1	Annealed Condition (M)	≥685	≥585	≥20
Hot Rolled, Cold Rolled Plate; 1<t≤2	Annealed Condition (M)	≥685	≥585	≥15
Hot-rolled, cold-rolled sheet; 2 < t ≤ 5	Annealed Condition (M)	≥685	≥585	≥12
Hot-rolled, cold-rolled sheet; 5 < t ≤ 10	Annealed Condition (M)	≥685	≥585	≥12

Approximate Comparison Table Processing Titanium and Titanium Alloys

China	International Organization for Standardization	Germany	France	United Kingdom
GB	ISO	DIN EN/DIN	NF EN/NF	BS EN/BS
TA5	Ti-4Al-0.005B	TiAl4B	T-A4B	Ti-4Al-0.005B

TA5 Corresponding Standards(Same grade name, different standards)

1	GB /T 3621-2007
	TA5 Ti-4Al-0.005B
2	GB /T 3620.1-2016
	TA5 Ti-4Al-0.005B

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!