TA10 Ti-0.3Mo0.8Ni - GB /T 3621-2007

Grade	TA10
Other Names
Corresponding Standard	GB /T 3621-2007 Titanium and titanium alloy plate and sheet
Classification	Titanium and Titanium Alloys

TA10 Chemical Element Composition Content (%)

Component	Fe	C	Ni	Mo	N	H	O	Other Individual	Other Total	More
Minimum Value	-	-	0.6	0.2	-	-	-	-	-	Ti:余量
Maximum Value	0.3	0.08	0.9	0.4	0.03	0.015	0.25	0.1	0.4	Ti:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

TA10 Mechanical Properties

condition	Mark	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
Hot rolled, cold rolled plates; 0.8≤t≤10	TA10 A Grade	Annealed Condition (M)	≥485	≥345	≥18
Hot rolled, cold rolled plates; 0.8≤t≤10	TA10 B Grade	Annealed Condition (M)	≥345	≥275	≥25

Approximate Comparison Table Processing Titanium and Titanium Alloys

China	United States	International Organization for Standardization		Germany		France	United Kingdom
GB	ASTM	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	NF EN/NF	BS EN/BS
TA10	Grade 12	Ti-0.3Mo-0.8Ni	R53400	TiNi0.8	3.7105 R53400	T-N0.8D R53400	Ti-0.3Mo-0.8Ni R53400

TA10 Corresponding Standards(Same grade name, different standards)

1	GB /T 3621-2007
	TA10 Ti-0.3Mo0.8Ni
2	GB /T 3620.1-2016
	TA10 Ti-0.3Mo0.8Ni
3	GB /T 42159-2022
	TA10 Ti-0.3Mo0.8Ni

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!