中文版
Home Material GB /T 3621-2007
简体 | 繁體
Grade TA11
Other Names
Corresponding Standard GB /T 3621-2007
Titanium and titanium alloy plate and sheet
Classification Titanium and Titanium Alloys
Density 4.37 g/cm3
TA11 Chemical Element Composition Content (%)
Component Fe C Mo N V Al H O Other Individual Other Total More
Minimum Value - - 0.75 - 0.75 7.35 - - - - Ti:余量
Maximum Value 0.3 0.08 1.25 0.05 1.25 8.35 0.015 0.12 0.1 0.3
"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.
TA11 Mechanical Properties
condition Heat Treatment or Condition
Tensile Strength
σb
Mpa 		Yield Point
σs
Mpa 		Elongation or Extension Rate
δ
%
Hot-rolled, Cold-rolled Plates; 5<t≤12 Annealed Condition (M) ≥895 ≥825 ≥10
Approximate Comparison Table Processing Titanium and Titanium Alloys
China International Organization for Standardization Germany France United Kingdom
GB ISO Numerical Grade DIN EN/DIN W-Nr. NF EN/NF BS EN/BS
TA11 Ti-8Al-1Mo-1V R54810 TiAl8Mo1V1 R54810 Ti-8Al-1Mo-1V Ti-8Al-1Mo-1V
R54810
TA11 Corresponding Standards(Same grade name, different standards)
1 GB /T 3621-2007
TA11 Ti-8Al-1Mo-1V
2 GB /T 3620.1-2016
TA11 Ti-8Al-1Mo-1V

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!