TB2 Ti-5Mo-5V-8Cr-3Al - GB /T 3621-2007

Grade	TB2
Other Names
Corresponding Standard	GB /T 3621-2007 Titanium and titanium alloy plate and sheet
Classification	Titanium and Titanium Alloys
Density	4.83 g/cm³

TB2 Chemical Element Composition Content (%)

Component	Fe	C	Cr	Mo	N	V	Al	H	O	Other Individual	Other Total	More
Minimum Value	-	-	7.5	4.7	-	4.7	2.5	-	-	-	-	Ti:余量
Maximum Value	0.3	0.05	8.5	5.7	0.04	5.7	3.5	0.015	0.15	0.1	0.4	Ti:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

TB2 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
Hot Rolled, Cold Rolled Plate; 1≤t≤3.5	Solution State (ST)	≤980	≥20
Hot Rolled, Cold Rolled Plate; 1≤t≤3.5	Solution aged state (STA)	1320	≥8

Approximate Comparison Table Processing titanium and titanium alloy

China	International Organization for Standardization	Germany	France	United Kingdom
GB	ISO	W-Nr.	NF EN/NF	BS EN/BS
TB2	Ti-5Mo-5V-8Cr-3Al	TiMo5V5Cr8Al3	T-D5V5C8A3	Ti-5Mo-5V-8Cr-3Al

TB2 Corresponding Standards(Same grade name, different standards)

1	GB /T 3620.1-2007
	TB2 Ti-5Mo-5V-8Cr-3Al
2	GB /T 3621-2007
	TB2 Ti-5Mo-5V-8Cr-3Al
3	GB /T 3620.1-2016
	TB2 Ti-5Mo-5V-8Cr-3Al
4	GJB 2219-1994
	TB2 Ti-5Mo-5V-8Cr-3Al

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!