TC1 Ti-2Al-1.5Mn - GB /T 3621-2007

Grade	TC1
Other Names
Corresponding Standard	GB /T 3621-2007 Titanium and titanium alloy plate and sheet
Classification	Titanium and Titanium Alloys
Density	4.55 g/cm³

TC1 Chemical Element Composition Content (%)

Component	Fe	C	Mn	N	Al	H	O	Other Individual	Other Total	More
Minimum Value	-	-	0.7	-	1	-	-	-	-	Ti:余量
Maximum Value	0.3	0.08	2	0.05	2.5	0.012	0.15	0.1	0.4	Ti:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

TC1 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Elongation or Extension Rate δ %
Hot-rolled, Cold-rolled sheet; 0.5≤t≤1	Annealed Condition (M)	590~735	≥25
Hot Rolled, Cold Rolled Plate; 1<t≤2	Annealed Condition (M)	590~735	≥25
Hot-rolled, cold-rolled sheet; 2 < t ≤ 5	Annealed Condition (M)	590~735	≥20
Hot-rolled, cold-rolled sheet; 5 < t ≤ 10	Annealed Condition (M)	590~735	≥20

Approximate Comparison Table Processing titanium and titanium alloy

China	International Organization for Standardization	Germany	France	Russia
GB	ISO	DIN EN/DIN	NF EN/NF	GOST
TC1	Ti-2Al-1.5Mn	TiAl2Mn1.5	T-A2M1.5	ОТ4-1

TC1 Corresponding Standards(Same grade name, different standards)

1	GB /T 3620.1-2007
	TC1 Ti-2Al-1.5Mn
2	GB /T 3621-2007
	TC1 Ti-2Al-1.5Mn
3	GB /T 3620.1-2016
	TC1 Ti-2Al-1.5Mn

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!