41CrAlMo7-10 1.8509 - EN 10085-2001

Grade	41CrAlMo7-10
European Standard Steel Grade	1.8509
Corresponding Standard	EN 10085-2001 Nitriding Steels. Technical Delivery Conditions
Classification	Alloy Steel

41CrAlMo7-10 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S ^ⓐ	Cr	Mo	Al
Minimum Value	0.38	-	0.4	-	-	1.5	0.2	0.8
Maximum Value	0.45	0.4	0.7	0.025	0.035	1.8	0.35	1.2

41CrAlMo7-10 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW	Impact Energy Absorption KV2 J
Bars, flat products, forgings; 16≤d≤40	Quenching and Tempering (+QT)	950~1150	≥750	≥11	-	≥25
Bars, flat products, forgings; 40<d≤100	Quenching and Tempering (+QT)	900~1100	≥720	≥13	-	≥25
Bars, flat products, forgings; 100<d≤160	Quenching and Tempering (+QT)	850~1050	≥670	≥14	-	≥30
Bars, flat products, forgings; 160<d≤250	Quenching and Tempering (+QT)	800~1000	≥625	≥15	-	≥30
Bars, rods, flat products, forgings, semifinished products	Soft Annealing (+A)	-	-	-	≤248	-
	Nitriding	-	-	-	HV* 950	-

Approximate Comparison Table Nitriding Steels

China	Japan	International Organization for Standardization	European Standard
GB	JIS	ISO	EN	Numerical Grade
38CrMoAl	SACM645	41CrAlMo7-10	41CrAlMo7-10	1.8509

41CrAlMo7-10 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!