AlCuMg1 3.1325 - DIN 1725-1-1983

Grade	AlCuMg1
Commercial Grade
Germany W-Nr.	3.1325
Corresponding Standard	DIN 1725-1-1983 Aluminium alloy ; wrought alloys
Classification	Aluminum and Aluminum Alloys
Density	2.8 g/cm³

AlCuMg1 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	0.2	0.4	-	3.5	-	0.4	-	-	Al:余量；Ti+Zr≤0.25
Maximum Value	0.7	0.8	1	0.1	4.5	0.25	1	0.05	0.15	Al:余量；Ti+Zr≤0.25

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

1 Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China	Japan	United States		International Organization for Standardization		Germany		European Standard
GB	JIS	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN
2017	2017 A92017	2017	A92017	AlCu4MgSi	A92017	AlCu4Mg1	3.1325 A92017	EN-AW-AlCu4MgSi

2 Approximate Comparison Table Aluminium and Aluminium Alloy

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST
2017	A92017	AlCuMgSi	AlCuMg1	3.1325	2017A	ENAW-AlCu4MgSi(A)	ENAW-2017A	D1

AlCuMg1 Corresponding Standards(Same grade name, different standards)

1	DIN EN 1301-2-2008
	(AlCuMg1) AlCu4MgSi(A) EN AW-2017A EN AW-AlCu4MgSi(A) (3.1325)
2	DIN 1725-1-1983
	AlCuMg1 3.1325 2017A

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!