AlMg2.5 3.3523 - DIN 1725-1-1983

Grade	AlMg2.5
Commercial Grade
Germany W-Nr.	3.3523
Corresponding Standard	DIN 1725-1-1983 Aluminium alloy ; wrought alloys
Classification	Aluminum and Aluminum Alloys
Density	2.68 g/cm³

AlMg2.5 Chemical Element Composition Content (%)

Component	Fe	Si	Mn	Cr	Cu	Zn	Mg	Other Individual	Other Total	More
Minimum Value	-	-	-	0.15	-	-	2.2	-	-	Al:余量
Maximum Value	0.4	0.25	0.1	0.35	0.1	0.1	2.8	0.05	0.15	Al:余量

"Other individual elements or other totals": The chemical composition includes elements not specified in the table. Analysis should only be conducted if these elements are suspected to be present, or if routine analysis suggests that their content may exceed the prescribed limits.

1 Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China		United States		International Organization for Standardization		Germany		European Standard	Russia
GB	ISC	ASTM	UNS	ISO	Numerical Grade	DIN EN/DIN	W-Nr.	EN	GOST
5A02 (LF2)	5052	5052	A95052	AlMg2.5	A95052	AlMg2.5	3.3523 A95052	EN-AW-AlMg2.5	АМг2.5

2 Approximate Comparison Table Aluminium and Aluminium Alloy

Japan	United States	International Organization for Standardization	Germany		France	European Standard		Sweden	United Kingdom
JIS	UNS	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	SS	BS EN/BS
5052	A95052	AlMg2	AlMg1.8 AlMg2.5	3.3326	5052	ENAW-AlMg2(B)	ENAW-5051A	AlMg2.5	5251

3 Approximate Comparison Table Wrought Aluminum and Aluminum Alloy

China	Japan	United States	International Organization for Standardization	Germany	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	BS EN/BS
5A02	A5052	5052	AlMg2.5	AlMg2.5	N4

AlMg2.5 Corresponding Standards(Same grade name, different standards)

1	DIN EN 1301-2-2008
	AlMg2.5 EN AW-5052 (3.3523) EN AW-AlMg2.5
2	DIN 1725-1-1983
	AlMg2.5 3.3523 5052

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!