X10NiCrAlTi 32-20 1.4876 - SEW 470(1976)

Grade	X10NiCrAlTi 32-20
	1.4876
Corresponding Standard	SEW 470(1976) Heat-resisting rolled and forged steels
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance
Density	8 g/cm³

X10NiCrAlTi 32-20 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Ti	Al
Minimum Value	-	-	-	-	-	19	30	0.15	0.15
Maximum Value	0.12	1	2	0.03	0.02	23	34	0.6	0.6

X10NiCrAlTi 32-20 Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Steel plate, steel strip, steel pipe, steel bar, forged product, steel wire	Recrystallization annealing	500~750	≥210	30	≤192
Steel plate, steel strip, steel pipe, steel bar, forged product, steel wire	Solid Solution Annealing	450~700	≥170	30	≤192

X10NiCrAlTi32-20 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!