S275NL 1.0491 - EN 10025-3-2019

Grade	S275NL
European Standard Steel Grade	1.0491
Corresponding Standard	EN 10025-3-2019 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
Classification	Alloy Steel

S275NL Chemical Element Composition Content (%)

Component	C	Si	Mn	P ^①	S ^①②	Cr	Ni	Cu	Mo	N	Ti	V	Nb	Al ^③
Minimum Value	-	-	0.5	-	-	-	-	-	-	-	-	-	-	0.02
Maximum Value	0.16	0.4	1.5	0.025	0.02	0.3	0.3	0.55	0.1	0.015	0.05	0.05	0.05	-

S275NL Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t≤16	370~510	≥275	≥24
16＜t≤40	370~510	≥265	≥24
40＜t≤63	370~510	≥255	≥24
63＜t≤80	370~510	≥245	≥23
80＜t≤100	370~510	≥235	≥23
100＜t≤150	350~480	≥225	≥23
150＜t≤200	350~480	≥215	≥23
200＜t≤250	350~480	≥205	≥23

Approximate Comparison Table

S275NL Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!