S275M 1.8818 - EN 10025-4-2019

Grade	S275M
European Standard Steel Grade	1.8818
Corresponding Standard	EN 10025-4-2019 Technical Delivery Conditions for Thermomechanical Rolled Weldable Fine Grain Structural Steels
Classification	Alloy Steel

S275M Chemical Element Composition Content (%)

Component	C ^④	Si	Mn	P ^①	S ^①②	Cr	Ni	Cu	Mo	N	Ti	V	Nb	Al ^③
Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	-	0.02
Maximum Value	0.13	0.5	1.5	0.025	0.025	0.3	0.3	0.55	0.1	0.015	0.05	0.08	0.05	-

S275M Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t≤16	370~530	≥275	≥24
16＜t≤40	370~530	≥265	≥24
40＜t≤63	360~520	≥255	≥24
63＜t≤80	350~510	≥245	≥24
80＜t≤100	350~510	≥245	≥24
100＜t≤150	350~510	≥240	≥24

Approximate Comparison Table Structural, Pressure Vessel and Engineering Steels

S275M Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!