S460ML 1.8838 - EN 10025-4-2019

Grade	S460ML
European Standard Steel Grade	1.8838
Corresponding Standard	EN 10025-4-2019 Technical Delivery Conditions for Thermomechanical Rolled Weldable Fine Grain Structural Steels
Classification	Alloy Steel

S460ML Chemical Element Composition Content (%)

Component	C ^④	Si	Mn	P ^①	S ^①②	Cr	Ni	Cu	Mo	N	Ti	V	Nb	Al ^③
Minimum Value	-	-	-	-	-	-	-	-	-	-	-	-	-	0.02
Maximum Value	0.16	0.6	1.7	0.025	0.02	0.3	0.8	0.55	0.2	0.025	0.05	0.12	0.05	-

S460ML Mechanical Properties

	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t≤16	540~720	≥460	≥17
16＜t≤40	540~720	≥440	≥17
40＜t≤63	530~710	≥430	≥17
63＜t≤80	510~690	≥410	≥17
80＜t≤100	500~680	≥400	≥17
100＜t≤150	490~660	≥385	≥17

Approximate Comparison Table Structural, Pressure Vessel and Engineering Steels

S460ML Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!