254SMO - H2ABC

Grade	254SMO
Brand/Supplier	-> Sandvik
Classification	Austenitic Stainless Steel
Properties	Corrosion Resistance Weldability
Density	8 g/cm³

254SMO Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr ^*	Ni ^*	Cu ^*	Mo ^*	N ^*
Minimum Value	-	-	-	-	-	-	-	-	-	-
Maximum Value	0.02	0.8	1	0.03	0.01	-	-	-	-	-
Nominal Value	-	-	-	-	-	20	18	0.7	6.1	0.2

Manufacturer material
*Approximate value, not maximum value

254SMO Mechanical Properties

condition	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
Seamless pipe, tube; t<5	Solid Solution Annealing	675~850	≥310	≥35	HRB ≤96
Seamless pipe, tube; t>5	Solid Solution Annealing	655~850	≥310	≥35	HRB ≤96

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!