P295GH 1.0481 - EN 10028-2-2017

Grade	P295GH
European Standard Steel Grade	1.0481
Corresponding Standard	EN 10028-2-2017 Flat Products Made of Steels for Pressure Purposes — Part 2: Non-Alloy and Alloy Steels with Specified Elevated Temperature Properties
Classification	Carbon Steel

P295GH Chemical Element Composition Content (%)

Component	C	Si	Mn ^③	P	S	Cr	Ni	Cu ^⑤	Mo	N ^④	Ti	V	Nb	Al	More
Minimum Value	0.08	-	0.9	-	-	-	-	-	-	-	-	-	-	0.02	Cr+Cu+Mo+ Ni≤ 0.7
Maximum Value	0.2	0.4	1.5	0.025	0.01	0.3	0.3	0.3	0.08	0.012	0.03	0.02	0.03	-	Cr+Cu+Mo+ Ni≤ 0.7

P295GH Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Impact Energy Absorption KV2 J
t≤16	Normalizing (+N)**	460~580	≥295	≥21	* ≥40
16＜t≤40	Normalizing (+N)**	460~580	≥290	≥21	≥40
40＜t≤60	Normalizing (+N)**	460~580	≥285	≥21	≥40
60＜t≤100	Normalizing (+N)**	460~580	≥260	≥21	≥40
100＜t≤150	Normalizing (+N)**	440~570	≥235	≥21	≥40
150＜t≤250	Normalizing (+N)**	430~570	≥220	≥21	≥40

1 Approximate Comparison Table Pressure-Bearing Flat Steel

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
P295GH	P295GH	1.0481

2 Approximate Comparison Table Carbon Structural Steel and Engineering Steel

Japan	United States	International Organization for Standardization	Germany	France	European Standard		Russia	Sweden	United Kingdom
JIS	ASTM	ISO	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	SS	BS EN/BS
SG365 SPV315 SPV32	A516Gr.65 X46	P11	1.0436	A48AP A48CP A48FP	P295GH	1.0481	14G2 18K	2102 2103	224-460B 224Gr.460 224Gr.490 430LT

P295GH Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!