P460NL2 1.8918 - EN 10028-3-2017

Grade	P460NL2
European Standard Steel Grade	1.8918
Corresponding Standard	EN 10028-3-2017 Flat Products Made of Steels for Pressure Purposes - Part 3: Weldable Fine Grain Steels, Normalized
Classification	Alloy Steel

P460NL2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^{ⓔ ⓕ}	Mo	N	Ti	V	Nb	Al ^{ⓒ ⓓ}	More
Minimum Value	-	-	1.1	-	-	-	-	-	-	-	-	-	-	0.02	Nb+Ti+V ≤0.22
Maximum Value	0.2	0.6	1.7	0.02	0.005	0.3	0.8	0.7	0.1	0.025	0.03	0.2	0.05	-	Nb+Ti+V ≤0.22

P460NL2 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t≤16	Normalizing (+N)	570~730	≥460	≥16
16＜t≤40	Normalizing (+N)	570~720	≥445	≥16
40＜t≤60	Normalizing (+N)	570~720	≥430	≥16
60＜t≤100	Normalizing (+N)	540~710	≥400	≥16
100＜t≤150	Normalizing (+N)	520~690	≥380	≥16
150＜t≤250	Normalizing (+N)	510~690	≥370	≥16

Approximate Comparison Table Pressure-Bearing Flat Steel

International Organization for Standardization		European Standard
ISO	Numerical Grade	EN	Numerical Grade
P460NL2	1.8918	P460NL2	1.8918

P460NL2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!