P420NL2 1.8913 - EN 10028-3-2017

Grade	P420NL2
European Standard Steel Grade	1.8913
Corresponding Standard	EN 10028-3-2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Classification	Alloy Steel

P420NL2 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu ^ⓕ	Mo	N	Ti	V	Nb	Al ^{ⓒ ⓓ}	More
Minimum Value	-	-	1.1	-	-	-	-	-	-	-	-	-	-	0.02	Nb+Ti+V≤ 0.22；Cr+Cu+Mo≤0.45
Maximum Value	0.2	0.6	1.7	0.025	0.005	0.3	0.8	0.3	0.1	0.02	0.03	0.2	0.05	-	Nb+Ti+V≤ 0.22；Cr+Cu+Mo≤0.45

P420NL2 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %
t≤16	Normalizing (+N)	540~690	≥420	≥19
16＜t≤40	Normalizing (+N)	540~690	≥405	≥19
40＜t≤60	Normalizing (+N)	540~690	≥395	≥19
60＜t≤100	Normalizing (+N)	515~665	≥370	≥19
100＜t≤150	Normalizing (+N)	500~650	≥350	≥19
150＜t≤250		490~640	≥340	≥19

Approximate Comparison Table

International Organization for Standardization		European Standard
ISO	Numerical Grade	Numerical Grade
P420NL2	1.8913	1.8913

P420NL2 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!