38SMn28 1.0760 - EN 10277-2018

Grade	38SMn28
European Standard Steel Grade	1.0760
Corresponding Standard	EN 10277-2018 Bright Steel Products - Technical Delivery Conditions
Classification	Carbon Steel
Properties	Machinability

38SMn28 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S
Minimum Value	0.35	-	1.2	-	0.24
Maximum Value	0.4	0.4	1.5	0.06	0.33

38SMn28 Mechanical Properties

thickness t mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Yield Point σ_s Mpa	Elongation or Extension Rate δ %	Hardness HBW
5≤t≤10	Cold Drawing (+C)	700~960	≥550	≥6
10<t≤16	Cold Drawing (+C)	660~960	≥500	≥6
16<t≤40	Cold Drawing (+C)	610~900	≥420	≥7
40<t≤63	Cold Drawing (+C)	600~840	≥400	≥7
63<t≤100	Cold Drawing (+C)	580~820	≥350	≥8
16<t≤40	Rolling and Decapping (+SH)	560~730			≤213
40<t≤63	Rolling and Decapping (+SH)	560~730			≤213
63<t≤100	Rolling and Decapping (+SH)	550~700			≤204
16<t≤40	Quenching and Tempering, Peeling (+QT+SH)	700~850	≥420	≥16
40<t≤63	Quenching and Tempering, Peeling (+QT+SH)	700~850	≥400	≥16
63<t≤100	Quenching and Tempering, Peeling (+QT+SH)	630~800	≥380	≥16
5≤t≤10	Quenching and Tempering, Cold Drawing (+QT+C)	850~1000	≥595	≥9
10<t≤16	Quenching and Tempering, Cold Drawing (+QT+C)	850~1000	≥595	≥9
16<t≤40	Quenching and Tempering, Cold Drawing (+QT+C)	700~900	≥490	≥11
40<t≤63	Quenching and Tempering, Cold Drawing (+QT+C)	700~900	≥490	≥12
63<t≤100	Quenching and Tempering, Cold Drawing (+QT+C)	700~900	≥490	≥12

1 Approximate Comparison Table Free-Cutting Structural Steel

International Organization for Standardization	European Standard
ISO	EN	Numerical Grade
38SMn28	38SMn28	1.0760

2 Approximate Comparison Table Free-Cutting Structural Steel

China	Japan	United States	International Organization for Standardization	Germany		France	European Standard		Russia	United Kingdom
GB	JIS	ASTM	ISO	DIN EN/DIN	W-Nr.	NF EN/NF	EN	Numerical Grade	GOST	BS EN/BS
Y40Mn	SUM42	1141 1139	44SMn28 35SMn20	38SMn28	1.0760	38SMn28	38SMn28	1.0760	A40Г	38SMn28

38SMn28 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!