X2CrNiMoN17-13-3 4429-316-53-I - ISO 4954-2018

Grade	X2CrNiMoN17-13-3
ISO Numeric Designation	4429-316-53-I
Corresponding Standard	ISO 4954-2018 Steels for cold heading and cold extruding
Classification	Austenitic Stainless Steel

X2CrNiMoN17-13-3 Chemical Element Composition Content (%)

Component	C	Si	Mn	P	S	Cr	Ni	Cu	Mo	N
Minimum Value	-	-	-	-	-	16.5	10.5	-	2.5	0.12
Maximum Value	0.03	1	2	0.045	0.015	18.5	13	1	3	0.22

X2CrNiMoN17-13-3 Mechanical Properties

diameter d mm	Heat Treatment or Condition	Tensile Strength σ_b Mpa	Reduction of Area ψ %
2<d≤5	+AT+C+AT	≤820	≥60
2<d≤5	+AT+C+AT+LC	≤870	≥55
5<d≤10	+AT or +AT+PE	≤780	≥60
5<d≤10	+AT+C	≤940
5<d≤10	+AT+C+AT	≤800	≥60
5<d≤10	+AT+C+AT+LC	≤850	≥55
10<d≤25	+AT or +AT+PE	≤780	≥60
10<d≤25	+AT+C	≤910
10<d≤25	+AT+C+AT	≤780	≥60
25<d≤50	+AT or +AT+PE	≤780	≥60

New and Old Grade Replacement List

Corresponding Standard	Grade
ISO 4954-1993	Grade
ISO 4954-2018	Grade ISO Numeric Designation

Approximate Comparison Table Stainless steels for cold heading and cold extruding

China		Japan	United States		International Organization for Standardization		European Standard
GB	ISC	JIS	ASTM/AISI	UNS	ISO	Numerical Grade	EN	Numerical Grade
022Cr17Ni12Mo2N (00Cr17Ni13Mo2N)	S31653	SUS316LN	316LN	S31653	X2CrNiMoN17-12-3	4429-316-53-I	X2CrNiMoN17-12-3	1.4429

X2CrNiMoN17-13-3 Corresponding Standards(Same grade name, different standards)

Note: The data is for reference only! If you have any questions, please fill out "I want to correct it"!